国产精品久久久久久一区二_精品日韩国产精品_国产精品va在线观看99_日本成人一区二区三区视频_香港三级香港日本三级久久_精品人妻中文字幕_www.av视频在线观看_亚洲AV成人无码精品小说在线_阿v天堂2017在线播放_国产一级无码视频毛片

歡迎訪問江蘇中威電力設備有限公司官網
發電機

中威電力中國品牌柴油發電機組生產商

全國服務熱線13813173135
熱門關鍵詞:發電機組 柴油發電機組 發電機生產廠家 發電機組配件
當前位置:首頁 > 中威新聞>行業新聞>中英文版柴油發電機房進風量計算Generator room wind intake calculation
聯系我們 Contact Us

全國統一服務熱線

0514-87943172 13813173135

我們的郵箱

baidu818@126.com

中英文版柴油發電機房進風量計算Generator room wind intake calculation

作者:中威網絡部 來源:移動式沃爾沃靜音箱100KW柴油發電機組 發表時間:2020-02-26 02:01:42 查看:
柴油發電機房采用清潔式通風時,應按下列規定計算進、排風量:

When diesel generator room adopts clean ventilation,Calculate the intake air volume and the exhaust air volume as follows:
柴油發電機
1.當柴油發電機房采用空氣冷卻時,按消除柴油發電機房內余熱計算進風量;

1. When the diesel generator room adopts air cooling, the intake air volume is calculated by eliminating the residual heat in the diesel generator room;

2.當柴油發電機房采用水冷卻時,按排除柴油發電機房內有害氣體所需的通風量經計算確定。有害氣體的容許含量取:CO為30mg/m3,丙烯醛為0.3mg/m3,或按大于等于20m3/(kW·h)計算進風量;

2.When the diesel generator room is water-cooled, the permissible amount of harmful gases determined by removing the amount of ventilation required for harmful gases in the diesel generator room is: CO is 30 mg/m3, and acrolein is 0.3 mg/m3. Or calculate the amount of air intake greater than or equal to 20 cubic meters/(kilowatt-h);


3.排風量取進風量減去燃燒空氣量。

柴油機燃燒空氣量,可根據柴油機額定功率取經驗數據計算:7m3/(kW·h)。清潔通風時,柴油機所需的燃燒空氣直接取用發電機房室內的空氣;隔絕防護時,應從機房的進風或排風管引入室外空氣燃燒,但吸氣系統的阻力不宜超過1kPa。

3.Exhaust volume is equal to wind intake minus combustion wind quantity.

The amount of diesel engine combustion air can be calculated based on the diesel engine rated power and empirical data: 7m3/(kW·h).For clean ventilation, the combustion air required by the diesel engine directly uses the air in the generator room. In the case of isolation and protection, outdoor air shall be introduced from the air inlet pipe or exhaust pipe of the engine room, but the resistance of the air intake system should not exceed 1 kPa.